Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
The fully automatic food tray and egg tray vacuum forming machine is in high efficiency with low power consumption. It can automatically adjust suitable parameter to help you make more products, which can save lot cost on raw material. It can fast manufacture the products with easy operation, and support big safety for you, so you do not worry that it will bring danger to you. It is mainly made of anti-rust steel with high strength, and it’s difficult to be broken.
Emergency Stop:
There are set up multiple "emergency stop" buttons, and with the "emergency stop" button, it cuts off the power of the device forcibly in order to that no dangerous condition occurs during "emergency stop".
Eco-friendly:
You can accurately control each step for action to guarantee the products quality and production, which well avoids that the products is broken or can be used. It can totally achieve a goal to reduce waste, and even reduce the influence for environment, so that you can fit the environmental friendly demand, which can improve your status in the same competitors.
Meet Different Needs:
One machine can not only meet your single demand, you can change the mould to produce other products. It can produce all kind of trays, like round or square, if you have your own special shape to produce, you can leave message to us. Once we see it, we will reply to you.
Product Parameter:
|
Maximum Forming Area |
900mm*710mm |
|
Minimum Forming Area |
450mm*350mm |
|
Widest Sheet |
940mm |
|
Narrowest Sheet |
410mm |
|
Forming Thickness |
0.2—2.0mm |
|
Forming Height |
120mm |
|
Upper Furnace Heating Length |
1000mm |
|
Bottom Furnace Heating Length |
1000mm |
|
Stack Stroke |
500mm |
|
Cutting Upper Die Table Stroke |
100mm |
|
Cutting Lower Die Table Stroke |
120mm |
|
Cutting Force |
80T |
|
Cutting Method |
Laser Wooden Die/Metal Stamping Knife |
|
Total Power of Upper Furnace |
28.8KW |
|
Total Power of Lower Furnace |
28.8KW |
|
Pulling Motor |
5.5KW |
|
Total Power of Equipment |
80KW (normal use 40%-70%) |
|
Vacuum Pump |
160m³/h |
|
Molding Cooling Method |
Water Cooling + Air Cooling |
|
Total Air Source (External Configuration) |
0.8Mpa |
|
Power Supply |
380V/50HZ (three-phase four-wire 70 m²) |
|
Total Equipment Weight (Reference) |
About 10T |
|
Machine Size |
About 12000*2500*3200mm (for reference, subject to actual design) |
Our Advantages Different from Others?
