Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
The fruit box vacuum forming machine is with strong power, can produce multiple fruit box. And the machine is used with anti-rust material, so it’s difficult to rust in terrible environment. It’s also made of high quality components and advanced technology, as well as it can last for many years. You can clean the machine with water, it’s easy to clean up. The more important is that it can continuously work with high efficiency.
Safe:
The system is equipped with a number of protective measures, and each action that may collide with each other is equipped with chain protection. The protective sealing device of the safety door adopts manual buckle and manual locking, which improves the safety factor of the equipment. The power distribution cabinet contains protection circuits to keep you secure, including overcurrent, overvoltage, undervoltage, short circuit and overload protection. The heating element has fuse protection. For safety issues that may cause harm to the system or items, there are warning signs or notes can be seen.
Convenient:
The working mode is divided into manual and automatic, and all setting operations are realized on the touch screen. When the operator places the material, press the button of automatic start equipment to complete the entire process of molding process until the material in the warehouse to save is processed and produced. The manual is mainly used for changing mold or sample control. The non-removable cables and the wires outside the power box are hidden in the cable groove, which is easy to open and repair.
Product Parameter:
Maximum Forming Area |
600mm*710mm |
Minimum Forming Area |
340mm*410mm |
Widest Sheet |
780mm |
Narrowest Sheet |
340mm |
Forming Thickness |
0.2—2.0mm |
Forming Upper Die Table Stroke |
120mm |
Forming Lower Die Table Stroke |
120mm |
Furnace Length |
1850mm |
Lower Furnace Length |
1850mm |
Stack Stroke |
500mm |
Cutting Upper Die Table Stroke |
120mm |
Cutting Lower Die Table Stroke |
120mm |
Cutting Force |
80T |
Cutting Method |
Laser Wooden Knife Mold / Aluminum Frame with Knife / Metal Stamping Knife |
Total Power of Upper Furnace |
66KW |
Total Power of Lower Furnace |
66KW |
Pulling Motor |
5.5KW |
Total Power of Equipment (total installed power) |
146KW (normal use power: 60KW-90KW) |
Vacuum |
200m3/h |
Molding Cooling Method |
Water Cooling + Air Cooling |
Total Air Source (external configuration) |
0.8Mpa |
Power Supply |
380V/50HZ (three-phase four-wire 70 m2) |
Main Frame |
channel steel, steel plate, angle iron, pig iron, and stainless steel are domestically produced, and the supporting part is made of stainless steel |
Body Sheet Metal |
baking paint and electroplating treatment |
Total Equipment Weight (reference) |
15T |
Machine Size |
About 12000*2500*2800mm (for reference) |