Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
The biscuit tray vacuum forming machine can help you to do many kinds of biscuit trays. If you employ many workers to make the biscuit tray, it’s too time-wasting and not environmental friendly. But with it, it can accurately calculate the suitable material to make, and you can quickly get the trays that you want. If you want to customize logo or any information on your machine, you can also tell us, we will satisfy your all needs.
Easy to Operate:
The detailed data that you need to know is all showed in the screen, and you can just follow it to do the action to do the whole process. It’s easy to operate, even though you do not know the process, you can all complete the whole steps with the machine.
Easy to Clean:
The body is mainly of the steel, and the exterior is also painted with anti-rust painters to prevent the rust, and you may even do not worry that it will make corrosion in touching with the oil or other liquids. For the normal maintenance, you can just clean the machine by water or special cleaner, or it will influence the chemical in the painter to make it rust.
Product Parameter:
|
Maximum Forming Area |
900mm*710mm |
|
Minimum Forming Area |
450mm*350mm |
|
Widest Sheet |
940mm |
|
Narrowest Sheet |
410mm |
|
Forming Thickness |
0.2—2.0mm |
|
Forming Height |
120mm |
|
Upper Furnace Heating Length |
1000mm |
|
Bottom Furnace Heating Length |
1000mm |
|
Stack Stroke |
500mm |
|
Cutting Upper Die Table Stroke |
100mm |
|
Cutting Lower Die Table Stroke |
120mm |
|
Cutting Force |
80T |
|
Cutting Method |
Laser Wooden Die/Metal Stamping Knife |
|
Total Power of Upper Furnace |
28.8KW |
|
Total Power of Lower Furnace |
28.8KW |
|
Pulling Motor |
5.5KW |
|
Total Power of Equipment |
80KW (normal use 40%-70%) |
|
Vacuum Pump |
160m³/h |
|
Molding Cooling Method |
Water Cooling + Air Cooling |
|
Total Air Source (External Configuration) |
0.8Mpa |
|
Power Supply |
380V/50HZ (three-phase four-wire 70 m²) |
|
Total Equipment Weight (Reference) |
About 10T |
|
Machine Size |
About 12000*2500*3200mm (for reference, subject to actual design) |
FAQ:
---One machine can be also accepted.
---About 15-60 days, the detailed time needs your detailed information.
---We are factory.
---Yes, we can support. If you have detailed picture or information, you can leave it to us, once we see it, we will reply to you as far as possible.
---The best is to support drawings.
---Sorry, the product we sold is machine, so we can not support the sample. If you want to build your own machine, you can tell us your requirements and detailed drawings, then we will make it for you. And before sending, we will take picture to you. If you do not satisfy, we will modify it until you are satisfied.
