Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
The automatic vacuum forming machine can accurately control the speed and direction to make production. It is equipped with safe protector, like overloading, too hotness, etc., it will automatically cut off the power to ensure you safety at first. With the reasonable structure, it can stably operate with easy operation, which can help you to solve the difficult problems. Besides, it can also adjust its each action to make the products with high quality.
Easy Operation:
You can see the screen clearly, and various parameters are all in the screen, so you can easily set up the parameter, such as pressure, temperature, time, etc. To make the products automatically. The machine is also easy to maintain and repair, once you meet any problem, you can repair the problem with easy operation, so that it can fast put into production.
Eco-friendly:
It can optimize the production plan to prevent the lack and rest, which also puts an end to the waste. If you use the environmental friendly material, the products made are also eco-friendly. You can also try to make eco-friendly products. Besides, it can also apply with the eco-friendly technology to reduce the influence of the environment.
High Efficiency:
It can automatically optimize the production plan, improve the production speed, and optimize the production process to improve the production efficiency. For example, it can speed up all actions and improve the production technology to improve the production speed. It’s difficult for human to research the data, but for the machine, it can get data to do accurate analysis.
Product Parameter:
|
Maximum Forming Area |
900mm*710mm |
|
Minimum Forming Area |
450mm*350mm |
|
Widest Sheet |
940mm |
|
Narrowest Sheet |
410mm |
|
Forming Thickness |
0.2—2.0mm |
|
Forming Height |
120mm |
|
Upper Furnace Heating Length |
1000mm |
|
Bottom Furnace Heating Length |
1000mm |
|
Stack Stroke |
500mm |
|
Cutting Upper Die Table Stroke |
100mm |
|
Cutting Lower Die Table Stroke |
120mm |
|
Cutting Force |
80T |
|
Cutting Method |
Laser Wooden Die/Metal Stamping Knife |
|
Total Power of Upper Furnace |
28.8KW |
|
Total Power of Lower Furnace |
28.8KW |
|
Pulling Motor |
5.5KW |
|
Total Power of Equipment |
80KW (normal use 40%-70%) |
|
Vacuum Pump |
160m³/h |
|
Molding Cooling Method |
Water Cooling + Air Cooling |
|
Total Air Source (External Configuration) |
0.8Mpa |
|
Power Supply |
380V/50HZ (three-phase four-wire 70 m²) |
|
Total Equipment Weight (Reference) |
About 10T |
|
Machine Size |
About 12000*2500*3200mm (for reference, subject to actual design) |
