Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
The car tail cushion vacuum forming machine can make good quality car tail cushion dependent on the advanced craftsmanship. Whatever how much your seniority, the machine is equivalent to multiple experienced experts to do production, it can even predict the risk and remedy the risk at once, because it can quickly deal with a large quantity of data involved, then to improve the production without damaging the quality.
Cost-effective:
It can make most utilization to produce car tail cushion without any waste, its each process is by precise measurement, so that it can produce lot of products with the same material. What’s more, it can help to reduce production costs, if it is made by human, human can not prepare the material in right rate, to cause the mats with lost of waste, and increase the production cost.
Consistent quality:
The machine can produce car tail cushions with consistent quality, ensuring that each cushion meets the same high standards. Therefore, you do not need to worry about human will make poor quality of products, then they will ignore the products, because they think it’s too wasteful, which makes your reputation in bad condition, and even loss some deals.
Customizable Design:
The machine can be customized to produce car tail cushions in a variety of shapes, sizes, and colors, allowing manufacturers to meet the specific needs of their customers. And you can make drawings with your certain needs, then we will give you quick reply about the specific date for finishing.
Are you interested in machine from others or ours? If you are interested, you can also contact with us. And you can tell more about the functions, once we get it, we will make a perfect plan or drawing to you.
Product Parameter:
|
Maximum Heating Area |
1000mm*2000mm |
|
Forming Thickness |
1-5mm |
|
Product Forming Height |
300mm |
|
Furnace Length |
1875mm |
|
Total Power of Upper Furnace |
77KW |
|
Total Power of Equipment |
90KW (subject to actual conditions, normal use power: 40%-60%) |
|
Vacuum |
200m³/h |
|
Work Efficiency |
1-3 minutes/mould, depending on the thickness of the plate |
|
Total Air Source (external configuration) |
0.6-0.8Mpa |
|
Power |
380V/50HZ (4+1 cable 50 m²) |
|
Pulling Chain |
KMC brand double row B chain (Taiwan) |
|
Total Equipment Weight (reference) |
5T |
|
Machine Size |
10000mm*2500mm*2800mm (accurate for actual design) |
